Troubleshooting Guide: Fixing iPhone Sound Issues in 2025

Get 15 easy ways to fix the sound quality of your iPhone with our help. Read to know more.
If you have any issue related to to iphone guide then visit this page.

---

Quick Fixes Summary

• Check your iPhone mute switch and volume settings to ensure they’re not silencing your phone.Ensure that your iPhone is not paired with a Bluetooth device, as such a connection can redirect sound from your speaker.

Make sure to clean the speaker of your iPhone. There might be debris blocking the sound output.

Restart iPhone to fix sound issues or update iPhone software if sound issues persist after basic troubleshooting.

If iPhone sound issues still persist, go ahead and reset your iPhone sound settings or contact Apple Support for help.

The iPhone speaker helps us listen to audios and calls without any trouble. If your iPhone speakers aren’t emitting sound, audio isn’t working in apps or the device is not making any sound at all while on a call, these solutions can help you.

The solutions outlined herein are for iPhones and iOS 16 and above, however, most will also work on earlier versions too. Try the audio troubleshooting steps below to resolve the iPhone audio issue and get your device working again.

Check Your iPhone Volume Settings

Select Settings app > Sounds & Haptics. To make the volume louder in Ringers and Alerts, drag the slider to the right. If you hear a sound, the iPhone speaker works correctly. If you haven’t heard anything, it may need a hardware repair.

This is the most common cause of iPhone sound problems. Users often reduce the volume slider without any realization. After system software updates, iPhone Soundcheck volume control preferences may get reset.  If you have any issue related to iPhone Footage in Premiere Pro then dont worry we also provide solution of this issue here on this website.

Check the iPhone Mute Switch

The Switch controls Ring/Silent which is also known as iPhone mute switch. When the toggle switch, located at the back of the device, is pushed orange, it indicates that the switch is set to iPhone silent mode. Push the switch toward the screen to enable sound.

Your iPhone’s mute switch can be found on the left side, right above the volume buttons. The physical switch can easily be toggled by mistake when placing your iPhone in your pocket or bag. This causes no sound on iPhone to occur unexpectedly.

Turn Off Do Not Disturb Mode

Do Not Disturb mode silences many sounds and alerts. Turn off Do Not Disturb if you can’t hear any sound through your phone. To turn off Do Not Disturb feature on Android, open Settings app, tap on Do Not Disturb, and move the toggle switch to off position.

All you have to do is look for the crescent moon in the Control Center or status bar to see if Do Not Disturb is active. If the function is on Do Not Disturb, alert tones will not be played by iPhone.

Disconnect Bluetooth Devices

When your iPhone is connected to a Bluetooth audio device, it plays sound through that device and not through the speaker on the iPhone. Make sure that Bluetooth connections are correct for sound and switched off for sounds from iPhone speaker.

Go to Settings app > Bluetooth and toggle it off. Another option is to open Control Center and tap the Bluetooth icon to disable it. AirPods, wireless headphones, car audio systems, and smart speakers are Bluetooth devices that redirect audio. Your iPhone may still try to send audio to a Bluetooth device that isn’t turned on. This creates an iPhone Bluetooth audio problem.

Adjust In-App Volume Settings

Use the volume buttons in an app to change its sound settings. Some app sounds are too low to hear sometimes. Launch an app such as the Music app, Podcasts app, a game, or any app that plays sound. To make things louder, press the hardware volume buttons located on the side of the iPhone.

You might have the app sound settings too low. Launch the application and go to the page with the Play/Pause button. Move the slider to the right to increase the volume. Ringer volume and media volume are separate on iPhone. This is how app volume too low can happen when your ringer volume is at the max.

Check Third-Party App Sound Settings

You can get many third-party apps for volume and mutt customisation. For instance, you may have a setting for volume, music, sound effects and ambient noise.

Check for audio output settings or sound settings in the app. Disable any custom mute settings, enable audio, and use the volume slider to increase volume. Many apps offered by mobile platforms have their own independent mute options that are not affected by the iPhone’s volume. These create sound not playing in apps issues.

Review iPhone Notification Sound Settings

Check the sound settings in notifications for specific applications. You can choose the alert sound from some apps like Reminders app and Messages app. If this sound is set to None, the alert is silent.

To change the notifications of any app, tap on the sound. Choose a sound instead of None. This setting impacts sound alerts for just that app.

Clean Your iPhone Speakers

Dirt and lint get stuck in your iPhone speakers. This stops sound output and causes muffled or no sound on iPhone. The speaker at the bottom is for the main sound, while the top one is for the earpiece.

Grab a clean, dry toothbrush or soft toothbrush. Kind of wipe out dirt in the speaker grills. Holding compressed air at a distance can also blow out particles. Don’t use anything sharp or wet to clean the speakers. This can cause permanent damage.

Test with Headphones or Earbuds

Use a headphone to check if the issue with your iPhone speaker is hardware or software. Depending on the model of your iPhone, you can use wired headphones through the Lightning port or USB-C port. Listen for audio through headset using an app that plays sound.

Instead, plug in the head phone, unplug them and listen for sound on the speaker. If the sound works through the headphones than it does not work through the iPhone speaker means the issue is of the iPhone speaker. This means your hardware has a fault that needs fixing.

Restart Your iPhone

Restart iPhone if you still cannot hear any sound coming from iPhone. Try restarting your iPhone to see whether that helps with the audio problems.

For an iPhone with Face ID, press and release the Volume Up key first. Then, press and release the Volume Down key next. And, press and hold the Side button till the Apple logo appears.

To make a screenshot on a home button iPhone, Press the home button and the power button until you see the Apple logo

When your iPhone restarts, check the sound to make sure audio works again.

Update Your Apps

Sometimes the sound issue is due to an error by the app developer or the sound bug of that specific iOS app. Head over to your App Store, tap on your profile icon and check the pending updates. Update any apps that might be causing sound not to play in apps.

To switch on automatic app updates, click on Settings app > App Store. Then toggle on App Updates.

Update iOS Software

Apple notes that an iOS update can correct iPhone audio issues attributed to a firmware update bug. See if there are any software updates available from Apple. Download and install updates.

Go to Settings app > General > Software Update. If an update is available, tap Download and Install. Before you begin, ensure that your iPhone is connected to a Wi-Fi network and has enough battery power. Updates for the system software typically include fixes for sound troubleshooting and speaker hardware.

Reset All Settings

If the above steps don’t resolve your sound issue, Reset All Settings. It resets sound settings, display and network settings to iPhone default without erasing your data, apps or media.

Navigate to the Settings app on your iPhone and then select General. Press on Transfer or Reset iPhone followed by Reset tap on the option named Reset All Settings. Enter your passcode and confirm. Your iPhone will reboot, and all customizations will reset to factory settings. This usually fixes sound issues on iPhone that were caused by corrupted settings.

Contact Apple Support for Hardware Repair

If none of the steps work, your iPhone probably has a hardware issue with its speaker or audio parts. No matter the trouble, your only way out is to get in touch with Apple support for repairs.

You can check out apple support page, call apple support or schedule a genius bar appointment at apple store. Explain the troubleshooting steps you’ve already taken. If your iPhone is still under warranty or covered by AppleCare+, you won’t have to pay for repairs.

Common Causes Why There Is No Sound on Your iPhone

Learning more about the causes of iPhone audio issue can help you troubleshoot it in future.

The lack of sound can happen when.

• This Bluetooth device is incorrectly configured or isn’t turned on.
• Alerts are not making any sound by default.
• Your iphone is on do not disturb.
• Paraphrase and improve meaning of this (8 words):
• Individual apps have their own sound settings.

Audio playback issue problems may also be caused by software glitches and iOS sound bug issues.

FAQs

Why is my iPhone sound not working during calls?

During a call, check your iPhone’s call volume if you can’t hear the caller. Tap Speaker to toggle from earpiece to speakerphone. Use the volume buttons to increase call volume.

Why does my iPhone sound work with headphones but not speakers?

When this happens, it normally means there is an issue with the iPhone’s speaker, or you may have some debris blocking the speaker grills. Clean your speakers thoroughly. If sound is still only coming through the headphones, the speaker part may be damaged and needs hardware repair.

How do I change the alarm sound on an iPhone?

To change the alarm sound on an iPhone, launch the Clock app. Tap on Alarm and tap on the plus sign. Tap Sound and choose the ringtone you want. Optionally, tap Pick a song or Tone Store.

---

Conclusion

Usually, fixing iPhone sound issues is not too hard if you follow the steps. Focus first on the simplest solutions to fix the iPhone microphone issue, because they often work. Check your mute switch, volume, and Bluetooth settings before attempting a harder fix.

Most of the iPhone audio problems are not caused due to a serious hardware malfunction, but rather a software glitch. The iPhone sound can be fixed by the procedures provided in this solution. All you need to do is go through them one by one.